Mercury Elite 2000VA Pro Ups

Description

Specification

Rating input voltage	2000 VA / 1200 W
Rating input frequency	60/50Hz (auto sensing)
Input phase	Single phase
Input socket	With Fuse
Cold Start (0 to 100% load)	Press the ON/OFF Switch
Input Range (220V)	140-300
Rating output(VA)	2000
Rating output (W)	1200
Power factor	0.6
Rating output voltage (V)	220
Waveform	Battery mode (simulated sine wave), AC mode(sine wave)
AC Voltage Regulation	?±10% (Battery mode)
Rear output socket	4 x Universal ??“ Battery backup
Waveform	Simulated Sine Wave (Battery mode)
Line Mode	Synchronize with the utility
Rating frequency	60Hz or 50 Hz ?± 1 Hz
Battery Mode	Yellow flashing
Short circuit protection Line Mode	Fuse & Firmware protection
Short circuit protection Battery Mode	Firmware Protection
Overload protection Line Mode	110%?±5%; Go to fault mode Line Mode after 5 minutes, 120%?±5%; Go to fault mode immediately.
Overload protection Battery Mode	110%?±5%; Shutdown after 5 seconds, 120%?±5%, Shutdown immediately
Indicators AC mode	Green Lighting
Indicators Battery Mode	Yellow Flashing
Indicators Fault	Red Lighting
Alarm Battery Mode	Sounding every 10 Seconds
Alarm Low Battery	Sounding every Second
Alarm Overload	Sounding every 0.5 second
Alarm Fault	Continuously sounding
Full Protection	Overload, discharge, and Overcharge protection
Transfer Time	Typical 2-6ms, 10ms max.
Transfer Time	Typical 2-6ms, 10ms max.
Communication Interface	Optional RS232/RJ11
Recharge time ??“ Typical	6-8 hours recover to 90% capacity
Charge current	About 1A at normal mode.
Warranty	1 year warranty

General Inquiries

There are no inquiries yet.